EX-03 S.Tec 50 cm Tape Extender | 22 kN | With Protective Cover | Component of the EN FORCER

The EX-03 S.Tec Tape Extender is a component developed to integrate with the EN FORCER Sliding Fall Arrest system, making the connection foreseen in the assembly configuration and providing flexibility during the use of the fall protection system.

Made from high-strength tubular webbing , the EX-03 features a protective canvas cover , designed to protect the webbing against abrasion, friction, and wear resulting from contact during use.

Measuring 50 cm in length , with a minimum breaking load of 22 kN and weighing only 60 g , it features a lightweight and compact design for integration into the EN FORCER system.

The built-in protection helps preserve the inner tape in compatible applications, increasing its durability against wear caused by friction and frequent contact.

The EX-03 was developed to be part of the EN FORCER S.Tec fall arrest system and should be used in accordance with the manufacturer's instructions and in conjunction with components compatible with the system's intended configuration.

Its construction combines mechanical strength, low weight, and tape protection, making it suitable for professional applications where the EN FORCER system is technically required.

Main Benefits

Made from high-strength tubular webbing .
Length of 50 cm .
Minimum breaking load of 22 kN .
Weighing only 60g .
It has a protective canvas cover .
Protective coating designed to reduce abrasion and wear on the tape.
It helps to increase the component's durability.
Lightweight and compact construction.
Easy integration into compatible systems.
Developed to be used with the EN FORCER sliding fall arrest device .
It provides flexibility in system configuration.
Suitable for professional fall protection applications.
S.Tec / Safetec product.

Applications

The S.Tec EX-03 Tape Extender is suitable for use with the EN FORCER system and compatible applications, including:

EN FORCER Sliding Fall Arrest System
Fall protection systems
Compatible flexible anchor lines
Rope access
Technical rescue
Industrial maintenance
Industrial inspection
Energy sector
Telecommunications
Oil and gas
Offshore operations
Confined spaces
Civil construction
Other activities in which the EN FORCER configuration is foreseen.

Technical Specifications

Product: Tape Extender

Brand: S.Tec / Safetec

Model: EX-03

Code: EX3

Material: High-strength tubular tape

External Protection: Protective Canvas Cover

Length: 50 cm

Minimum Breaking Load: 22 kN

Weight: 60 g

Main Application: Component of the EN FORCER Sliding Fall Arrest System

Feature: Flexible Extender with Abrasion Protection

Usage Recommendations

Use the EX-03 only in accordance with the manufacturer's instructions.
Use as a component of the EN FORCER system or in configurations expressly specified by the manufacturer.
Before each use, perform a thorough inspection of the extender.
Check the condition of the tubular tape, protective cover, and seams.
Do not use if it shows cuts, tears, excessive abrasion, burns, damaged seams, or any other sign that could compromise its integrity.
Use only connectors and components that are compatible with the system.
Make sure all connections are properly made before use.
Do not make knots, cuts, additional seams, or modifications to the equipment.
Avoid contact with sharp edges, abrasive surfaces, and intense heat sources.
Respect the limitations of the component and other equipment that make up the system.
The strength of a complete system should not be determined solely by the breaking load of the extender.
Always use in conjunction with the protective equipment required for the activity.
The use of fall protection systems must be carried out by properly trained professionals.

Conservation and Maintenance

To preserve the characteristics of the EX-03 S.Tec Extender:

Inspect the equipment before and after each use.
Regularly check the tape, seams, and protective cover.
When necessary, clean with water and mild soap .
Do not use harsh chemicals.
If it gets wet, let it dry naturally in a well-ventilated place.
Do not use direct heat sources to speed up drying.
Store in a dry, clean, covered, and well-ventilated place.
Protect from unnecessary exposure to sunlight during storage.
Avoid contact with sharp and abrasive surfaces.
Keep away from intense heat sources.
Remove it from use if it shows damage that could compromise its durability or function within the system.

Why buy S.Tec / Safetec from FP Solução?

FP Solução is an official S.Tec / Safetec distributor in Macaé and the surrounding region , offering original equipment from the brand and specialized service to assist professionals and companies in choosing the appropriate components for each application.

At FP Solução, you can find the S.Tec EX-03 50 cm – 22 kN Tape Extender , the EN FORCER Sliding Fall Arrester , connectors, and other S.Tec / Safetec components for assembling professional systems.

FP Solução – Official Distributor of S.Tec / Safetec in Macaé and region.

🔰 From helmet to carabiner, FP is the solution! 🔰

Meta Description (SEO)

EX-03 S.Tec 50 cm webbing extender with protective canvas cover, minimum breaking load of 22 kN and weight of 60 g. Component of the EN FORCER system.

SEO Keywords

EX03 Extender, EX-03 Extender, EX03 S.Tec Extender, EX-03 S.Tec Extender, S.Tec Webbing Extender, S.Tec 50 cm Extender, 50 cm Extender, 22 kN Extender, 22 kN Tubular Webbing, Extender with Protective Cover, Extender for Fall Arrest System, EN FORCER Extender, EN FORCER, EN FORCER Component, Extender for Fall Protection System, Extender for Rope Access, Extender for Technical Rescue, Extender for Industrial Maintenance, Offshore Extender, Extender for Industrial Inspection, High-Strength Tubular Webbing, S.Tec Macaé, Safetec Macaé, S.Tec Macaé Distributor, Safetec Macaé Distributor, Official ST Distributor

Product selection

EX-03 S.Tec 50 cm Tape Extender | 22 kN | With Protective Cover | Component of the EN FORCER

Replacement EN FORCER Extension + 2 Stec Carabiners