Carregando conteúdo…
Carregando conteúdo…
No product video available
Contact technical support for more materials about this item.
The EN FORCER S.Tec Flexible Line Sliding Fall Arrestor is a personal protective equipment developed to be part of fall protection systems , operating on a vertical flexible anchor line.
The device has an automatic locking system , tracking the user's movement along the line and activating the locking mechanism in case of a fall, within the conditions specified for its use.
The EN FORCER was tested according to the requirements of NBR 14626 – Personal Protective Equipment against Falls from Height – Guided Sliding Fall Arrester on Flexible Line with Extender .
It must be installed on a flexible anchor line made of braided polyamide rope, core and sheath construction, with a diameter of 11 mm and in accordance with NBR 15986 , respecting the guidelines and limitations established by the manufacturer.
The body of the equipment is made of high-strength anodized aluminum , providing a lightweight and durable construction. The locking component is made of stainless steel , a material suitable for applications requiring mechanical and corrosion resistance.
One of the features of EN FORCER is its ease of installation on the rope, allowing it to be connected and disconnected at different points along the line , making the assembly and use of the system easier.
In the complete configuration specified by the manufacturer, the fall arrest device is attached to the flexible line using the 50 cm EX03 flexible extension and two COB S.Tec steel connectors .
ATTENTION: the EX03 extender and COB connectors are sold separately and are not included with the EN FORCER, unless expressly stated in the product's sales specifications.
Sliding fall arrest device with automatic locking .
Developed for use in flexible anchor lines .
Tested according to the requirements of NBR 14626 .
Compatible with 11 mm polyamide rope , as per specified configuration.
Rope line with core and sheath construction according to NBR 15986 .
Body manufactured from high-strength anodized aluminum .
Stainless steel locking component.
Automatic locking system in case of a fall.
Easy installation and handling on the rope.
It can be connected and disconnected at different points along the line.
Lightweight and ergonomic construction.
Suitable for vertical fall protection systems.
Metal components selected for strength and durability.
Extension and replacement connectors available separately.
S.Tec / Safetec product.
The EN FORCER S.Tec fall arrest device is suitable for use in flexible line vertical fall protection systems, including:
Vertical flexible anchor lines
Fall protection systems
Vertical displacements
Industrial maintenance
Vertical structures
Towers
Civil construction
Technical installations and maintenance
Compatible temporary or permanent systems
Other applications foreseen by the manufacturer for the equipment.
This should only be used with synthetic fiber rope anchor lines designed for attachment to an upper anchor point , respecting all system specifications.
Product: Guided Sliding Fall Arrest Device on Flexible Line
Brand: S.Tec / Safetec
Model: EN FORCER
Type: Mobile/Sliding Fall Arrest Device
Locking System: Automatic
Body Material: High-Strength Anodized Aluminum
Locking Component Material: Stainless Steel
Recommended Anchor Line: Braided Polyamide Rope – Core and Sheath
Rope Diameter: 11 mm
Recommended Rope Standard: NBR 15986
Test Standard Specified for Fall Arresters: NBR 14626
Additional References Provided: EN 353-2 / CE
Configuration Extender: EX03 – 50 cm
EX03 Extender Included: No – Sold Separately
Configuration Connectors: 2 S.Tec COB Steel Connectors
COB Connectors Included: No – Sold Separately
Minimum Resistance Reported for Each Independent Anchor Point: Greater than 15 kN
Application: Fall Protection System for Vertical Flexible Anchorage Line
Use EN FORCER only on systems that are compatible with the manufacturer's specifications.
The flexible anchor line must use 11 mm polyamide rope with core and sheath construction according to NBR 15986 , as per the intended configuration.
The line should be planned for attachment to an upper anchor point .
Each independent anchor point intended for securing the line must have a mechanical strength greater than 15 kN , as specified for the system.
Before each use, inspect the body, locking mechanism, and other components.
Perform a functional test of the locking mechanism before starting the activity.
Check the condition of the rope along its entire length.
Do not use ropes that are cut, excessively abraded, contaminated, or have other damage that could compromise their strength.
Use only extensions and connectors that are compatible with the configuration specified by the manufacturer.
When used in conjunction with other devices, these devices must meet applicable standards and requirements.
Do not make any alterations or modifications to the fall arrest device.
The equipment must be used by a properly trained professional and integrated into a correctly planned fall protection system.
After a fall or incident that could compromise the equipment, remove it from use and send it for evaluation according to applicable procedures.
Important: the 50 cm EX03 extension and the S.Tec COB steel connectors are sold separately .
To preserve the characteristics of the EN FORCER S.Tec:
Inspect the equipment before and after each use.
Keep the locking mechanism free of dirt and contaminants.
Periodically check the operation of the moving parts.
Avoid contact with chemical agents that are incompatible with the equipment materials.
After exposure to moisture, dry thoroughly before storing.
Do not use intense heat sources to speed up drying.
Store in a dry, clean, covered, and well-ventilated place.
Protect against impacts, deformation, and improper storage.
Do not use if the device shows signs of deformation, significant corrosion, excessive wear, or a failure in the locking mechanism.
Follow the inspection, maintenance, and decommissioning procedures established by the manufacturer.
FP Solução is an official S.Tec / Safetec distributor in Macaé and the surrounding region , offering access to the brand's equipment line, specialized service, and support in choosing the right products for each application.
At FP Solução, you can find the EN FORCER Sliding Fall Arrest Device from S.Tec , as well as the EX03 extender, COB connectors , and other S.Tec / Safetec equipment for assembling professional systems.
FP Solução – Official Distributor of S.Tec / Safetec in Macaé and region.
🔰 From helmet to carabiner, FP is the solution! 🔰
EN FORCER S.Tec fall arrest device for flexible line in 11 mm polyamide rope, automatic locking and NBR 14626 compliant. Official S.Tec distributor in Macaé.
Enforcer Fall Arresters, Enforcer Fall Arresters, Enforcer S.Tec, S.Tec Fall Arresters, Safetec Fall Arresters, Sliding Fall Arresters, Flexible Line Fall Arresters, 11mm Rope Fall Arresters, 11mm Rope Fall Arresters, NBR 14626 Fall Arresters, NBR 14626, NBR 15986 Fall Arresters, NBR 15986 Rope, Automatic Locking Fall Arresters, Vertical Fall Arresters, Fall Arresters for Anchorage Lines, Flexible Anchorage Lines, Fall Arresters for Lifelines, Enforcer 11mm, EX03 Extender, S.Tec COB Connector, Fall Protection Equipment, S.Tec Macaé, Safetec Macaé, S.Tec Macaé Distributor, Safetec Macaé Distributor, Official S.Tec Distributor, Official Distributor Safetec, FP Solution.