PRODUCT DESCRIPTION:
Y-shaped safety lanyard with energy absorber, made of webbing.
Elastic polyester tubing, equipped with three double-locking forged steel connectors.
with a 21mm opening at the lower end and two at the upper end.
with a 55mm opening.

PURPOSE AND APPLICATION:
These lanyards were designed to minimize risk and provide protection against...
The danger of falls from heights. However, remember that no PPE can provide complete protection.
complete protection, and due care should always be taken during the
engaging in risky activities.

INSTRUCTIONS FOR USE:
This lanyard was designed for use in a restraint system of
falls, and should only be connected to the dorsal D-ring of the harness.
security.
It is essential that the anchoring device or anchor point and the
Workers should always be positioned in a way that minimizes both risk and risk.
Regarding the possible distance of a fall. Make sure the point of
The anchor point should be above the user's head.
In a fall arrest system, it can only be used as a device for
body support: a seatbelt that meets NBR standards.
15836/15835:2010.
The Connection Subsystem
B. Level of Work
C Lower Level or Ground
D Free Fall 2 m max., as per.
Deceleration Distance
F Total Free Fall Distance (D) +
Deceleration (E)
INSPECTION / MAINTENANCE:
Lanyards should only be used by trained and competent individuals or under supervision.
Direct supervision by a competent person.

Before use, check the lanyard to ensure it is in good condition.
conditions and that it functions correctly.

For minor soiling, clean the lanyard with a cotton cloth or a wipe.
Soft brush. Do not use abrasive materials. For intensive cleaning, wash the
lanyard in water at a temperature between 30ºC and 60ºC, using a
Use neutral detergent (pH 7). The washing temperature should not exceed 60ºC.
Do not use acidic or basic detergents.

Inspect all lanyard straps, cables, and ropes for signs of
Also check all lanyard connectors for cuts or abrasion.
good mechanical functioning and the effects of corrosion or mechanical deformation,
If applicable. Ensure that the connector used is correctly installed.
fixed to the anchoring element and that it is locked, in accordance with NBR
15837:2010.

Remove any lanyard from use if any doubt arises about its condition.
Safe use, or if it has already been dropped.