Carregando conteúdo…
Carregando conteúdo…
No product video available
Contact technical support for more materials about this item.
The MGO56 EW Ultra Safe Double "Y" Lanyard – USL0056EW108 is a device developed for fall restraint and fall arrest, as well as for movement on structures , offering protection during horizontal and vertical displacements.
Its double "Y" shape allows for progression while maintaining connection during movements, making it ideal for professional operations that require alternating anchor points.
The model features an energy absorber , designed to reduce the energy transmitted to the user in the event of a fall arrest.
It is made of high-tenacity polyester webbing, 30 mm wide , and has protected eyelets in the areas where it connects to the hooks. The seams are made in a zigzag pattern, providing high localized resistance. These characteristics are confirmed by the manufacturer's current data sheet.
The set includes two MGO56 hooks , used for connecting to anchor points during progression. The commercially available configuration also includes an oval carabiner for attaching to the harness .
The USL0056EW108 model has a nominal length of approximately 1.08 m and is currently reported by Ultra Safe as tested for users weighing up to 140 kg .
It is suitable for professionals working in maintenance, assembly, metal structures, industrial operations, and other activities where fall protection is required during movement.
Dual "Y" configuration, allowing for switching between connection points.
Equipped with an energy absorber .
Developed for fall restraint and fall arrest .
Suitable for horizontal and vertical movements in structures.
It has 2 MGO56 hooks .
Hooks with an approximate opening of 56 mm .
The configuration includes 1 oval carabiner for attachment to the harness .
Made from high-tenacity polyester webbing .
Tapes with a width of 30 mm .
Eyelets with tape protection at the ends where they connect to the hooks.
Zig-zag stitching for high localized strength.
Nominal length of approximately 1.08 m .
This model has been tested for loads up to 140 kg , according to the manufacturer's current information.
Developed by Ultra Safe .
Reference USL0056EW108 .
The MGO56 EW Ultra Safe Double "Y" SDE Lanyard is indicated for:
Fall restriction
Fall arrest
Horizontal movement in structures
Vertical movement in structures
Progression with alternating connection points
Metal structures
Industrial maintenance
Industrial assembly
Inspection
Civil construction
Oil and gas
Offshore
Onshore
Compatible towers and structures
Professional operations with risk of falling
Product: Double Y-shaped lanyard with energy absorber.
Brand: Ultra Safe
Model: SDE Y Double MGO56 EW
Code / Reference: USL0056EW108
Configuration: Double in “Y”
Energy Absorber: Yes
Tape Material: High-Tenacity Polyester
Tape Width: 30 mm
Stitching: Zig-zag
Eyelet Protection: Protective Tape on the Ends
End Connectors: 2 MGO56 Hooks
Hook Opening: Approximately 56 mm
Harness Connector: 1 Oval Carabiner, as per the specified configuration.
Nominal Length: Approximately 1.08 m
Leg Color: Black
Manufacturer's stated capacity: Tested for up to 140 kg.
Application: Restraint, fall arrest, and movement in structures.
Before each use, perform a thorough inspection of the straps, seams, connectors, and power absorber.
Check that the hooks are working correctly and that the locking and fastening systems are intact.
The connection to the system must be made according to the manufacturer's instructions.
Always pay attention to the position of the anchor points during progression.
Avoid situations that could lead to a fall with a high risk of death.
Check beforehand the Free Fall Zone (FFZ) required for the configuration being used.
Do not use the lanyard if it has cuts, abrasions, burns, deteriorated webbing, damaged seams, or deformed connectors.
After the energy absorber is activated during a fall , the equipment must be taken out of service.
Do not make any modifications, repairs, or adaptations to the lanyard.
Use only with compatible equipment and within the limits established by the manufacturer.
Its use should be performed by a properly trained professional.
To preserve the equipment's characteristics:
Inspect the lanyard before and after each use.
Keep the ribbon cables and connectors clean and free of contaminants.
Avoid contact with chemicals, heat sources, sharp objects, or abrasive surfaces.
Do not store wet or damp equipment in bags, backpacks, or enclosed, unventilated spaces.
After use in humid environments, allow to air dry naturally in a well-ventilated place, protected from excessive heat.
Store in a dry, covered place, protected from direct sunlight.
Periodically check the connectors to ensure they are working properly.
If the energy absorber is activated, remove the equipment from service.
If you have any doubts about wear and tear or integrity, send the equipment for proper evaluation.
Always follow the instructions in the official Ultra Safe manual.
Ultra Safe is a brand specializing in equipment for fall protection, access control, and professional operations.
At FP Solução , you can find the MGO56 EW Ultra Safe Double "Y" Lanyard and other equipment for assembling personal protective equipment systems, with specialized service to assist in choosing the equipment compatible with each operation.
Ultra Safe SDE Y Double Lanyard MGO56 EW USL0056EW108 with energy absorber, 2 x 56 mm hooks and 1.08 m length. Tested for up to 140 kg.
Ultra Safe Lanyard, SDE Y Double Lanyard MGO56 EW, USL0056EW108, Ultra Safe double lanyard, Ultra Safe Y lanyard, lanyard with energy absorber, lanyard with impact absorber, MGO56 lanyard, 56 mm hook lanyard, 56 mm double hook lanyard, 1.08 m lanyard, lanyard up to 140 kg, fall protection lanyard, fall arrest lanyard, fall restraint lanyard, lanyard for horizontal movement, lanyard for vertical movement, lanyard for metal structures, industrial lanyard, lanyard with two hooks, lanyard with oval carabiner, fall protection equipment, Ultra Safe, FP Solução.