Carregando conteúdo…
Carregando conteúdo…
No product video available
Contact technical support for more materials about this item.
The Carbografite CG395 Double Y-Lanyard is a device developed to be part of fall protection systems, providing connection and movement for the user on structures compatible with the use of the equipment.
Made from tubular polyester webbing with internal elastic , it features a double "Y" configuration, allowing for the alternating use of the lanyard arms during movements and crossings, according to the procedures applicable to the activity.
The model features an energy absorber , a component developed to act in fall arrest situations, helping to limit the forces transmitted to the user and the system within the conditions specified for the equipment.
At the ends of both arms, the CG395 has two CG 630 connectors made of bichromated forged steel , equipped with a double locking mechanism and a 55 mm opening , facilitating connection to compatible structures and points.
For connection to the harness, the assembly has a CG 615 connector made of bichromated forged steel , also with double locking and a 15 mm opening .
With the shock absorber closed, the lanyard is 1.43 m long and weighs approximately 1.598 kg .
The CG395 lanyard complies with NBR 15834:2020 and NBR 14629:2020 standards. Its Certificate of Approval is linked to the full-body harness ; therefore, the configuration and compatibility of the assembly must be verified according to the harness used and its respective Certificate of Approval.
Double Y-shaped lanyard.
Equipped with an energy absorber .
Made from tubular polyester webbing .
It has an internal elastic band .
Configuration that facilitates movement and transfer in compatible systems.
2 CG 630 connectors at the ends.
CG 630 connectors with a 55 mm opening .
Connectors with double locking mechanism .
CG 630 manufactured from bichromated forged steel .
1 CG 615 connector for connection to the harness.
CG 615 with a 15 mm opening .
CG 615 with double lock .
CG 615 connector in bichromated forged steel .
Length of 1.43 m with the absorber closed .
Approximate weight of 1.598 kg .
Complies with NBR 15834:2020 .
Complies with NBR 14629:2020 .
AC combined with the parachute harness .
Product of Carbografite .
The Carbografite CG395 Y-shaped lanyard, when used in a compatible configuration, is indicated for:
Fall protection systems
Travel requiring continuous connectivity.
Transposition between compatible points
Civil construction
Industrial maintenance
Metal structures
Industrial assemblies
Services in structures
Compatible towers and structures
Professional activities that require a double lanyard with an energy absorber.
Other applications foreseen by the manufacturer and the protection system used.
Product: Double Y-shaped lanyard with energy absorber.
Brand: Carbografite
Model: CG395
Lanyard Material: Tubular Polyester Webbing
Construction: Ribbon with internal elastic.
Configuration: Double Y
Energy Absorber: Yes
Connectors at the Ends: 2 x CG 630
CG 630 Connector Material: Bichromated Forged Steel
CG 630 Locking System: Double Lock
CG 630 opening: 55 mm
Belt Connector: 1 x CG 615
CG 615 Connector Material: Bichromated Forged Steel
CG 615 Locking System: Double Lock
CG 615 opening: 15 mm
Length with absorbent pad closed: 1.43 m
Equipment Weight: 1.598 kg
Standards: NBR 15834:2020 / NBR 14629:2020
Certificate of Approval (CA): Combined with the Parachute Harness
Before each use, perform a thorough inspection of the lanyard.
Check the condition of the tubular webbing, seams, inner elastic, energy absorber, and connectors.
Make sure the connectors are working and locking together correctly.
Check if the energy absorber shows any signs of being open, activated, or damaged.
Use only in conjunction with a compatible safety harness .
Check the CA (Certificate of Approval) of the configuration combined with the belt before use.
Use only points and structures compatible with the fall protection system.
During movement, follow the proper procedures for using a double Y-shaped lanyard.
Avoid contact of the tape with sharp edges, abrasive surfaces, heat sources, and incompatible chemical agents.
Do not make knots, cuts, sews, repairs, or modifications to the equipment.
After a fall arrest, remove the equipment from service and follow the assessment and disposal procedures established by the manufacturer.
The equipment must be used by properly trained personnel and within a correctly planned fall protection system.
To preserve the characteristics of the CG395 Carbographite Lanyard:
Inspect the equipment before and after each use.
Keep the tape, absorber, and connectors clean.
Avoid contact with chemicals that may damage the materials.
Protect the tape from sharp and abrasive surfaces.
If it is damp, allow it to air dry naturally in a well-ventilated area.
Do not use direct heat sources to speed up drying.
Store in a dry, covered, clean, and well-ventilated place.
Keep protected from unnecessary sun exposure and intense heat sources.
Periodically check the operation of the connector locks.
Do not use the equipment if it shows cuts, excessive wear, damaged seams, deformations, or faulty connectors.
If the energy absorber has been activated, remove the equipment from use.
At FP Solução , you can find the CG395 Carbografite Double Y-shaped Lanyard with Energy Absorber , as well as full-body harnesses, connectors, and other equipment for assembling professional fall protection systems.
FP Solução offers specialized support to assist companies and professionals in choosing equipment and components compatible with the characteristics and needs of each operation.
Double Y-shaped lanyard CG395 Carbografite with energy absorber, 55 mm connectors, tubular webbing with elastic and NBR 15834 and NBR 14629 compliant.
CG395 Lanyard, Carbografite CG395 Lanyard, CG395 Carbografite, CG395 Y-shaped Lanyard, Carbografite Y-shaped Lanyard, Carbografite Double Lanyard, Double Y-shaped Lanyard, Lanyard with Energy Absorber, Y-shaped Lanyard with Absorber, Tubular Webbing Lanyard, Polyester Lanyard, Lanyard with Elastic, 55 mm Connector Lanyard, 55 mm Hook Lanyard, CG 630 Connector, CG630 Carbografite, CG 615 Connector, CG615 Carbografite, NBR 15834 Lanyard, NBR 14629 Lanyard, Lanyard for Parachute Harness, Fall Protection Lanyard, Safety Lanyard, Construction Lanyard, Industrial Lanyard, Fall Protection Equipment, Carbografite, FP Solução.