Carregando conteúdo…
Carregando conteúdo…
No product video available
Contact technical support for more materials about this item.
The Pro FP Safe FP-PCP Rope Protector was developed to protect ropes used in rope access operations, technical rescue, work at height, inspections and industrial maintenance , reducing direct contact of the rope with edges, corners and abrasive surfaces.
Manufactured with aramid fiber and high-tenacity canvas , the FP-PCP offers high wear resistance and provides a protective layer between the rope and critical structural points. The use of aramid enhances its resistance in applications involving abrasion and heat exposure , making the equipment suitable for demanding professional operations.
Measuring 65 cm in length by 15 cm in width , the protector provides ample coverage, allowing it to be positioned over the points of contact between the rope and edges, corners, and surfaces that could cause wear.
The device features a Velcro closure , facilitating installation and allowing for practical rope wrapping. The reinforced eyelet located at the end allows for securing the protector, helping to maintain its correct positioning during operation.
The Pro FP Safe Rope Protector combines strength, practicality, and ease of identification within rope access and rescue systems.
Ideal for professionals in the NR-35 (Brazilian safety standard), rope access, vertical rescue, technical rescue, industrial mountaineering, oil and gas, offshore, civil construction, industrial inspection and maintenance sectors, the FP-PCP helps preserve ropes and reduce damage caused by contact with aggressive surfaces.
Made with aramid fiber and high-tenacity canvas .
Protects the rope against abrasion, sharp edges, corners, and aggressive surfaces .
Material resistant to wear and heat.
Dimensions of 65 cm x 15 cm , providing ample protection area.
Velcro closure for quick and easy installation.
Reinforced eyelets to aid in securing and positioning the protector.
It helps reduce wear and tear caused by the rope coming into contact with structures.
It contributes to the preservation and longer lifespan of the strings.
Suitable for professional rope access and rescue operations.
Easy to transport, install, and integrate into rope systems.
The Pro FP Safe FP-PCP Rope Protector is recommended for:
Rope access
Working at height (NR-35)
Vertical rescue
Technical rescue
Industrial mountaineering
Rope edge protection
Rope protection on corners
Protection against abrasive surfaces
Industrial inspection
Industrial maintenance
Oil and gas
Offshore
Onshore
Civil construction
Professional rope systems
Product: Pro Rope Protector
Brand: FP Safe
Reference: FP-PCP
Material: Aramid Fiber and High-Tenacity Canvas
Length: 65 cm
Width: 15 cm
Dimensions: 65 cm x 15 cm
Closure: Velcro
Fastening: Reinforced Eyelet
Purpose: Protection of ropes against edges, corners, abrasive surfaces and critical contact points.
Position the protector directly over the point of contact between the rope and the surface that could cause abrasion or wear.
Use the Velcro closure to properly wrap and protect the rope.
Use the eyelet to secure the protector and help maintain its positioning.
Make sure the entire critical contact area is properly protected.
Before each use, perform a thorough inspection of the equipment.
Check the condition of the aramid, canvas, Velcro, seams, and eyelets.
If the equipment shows cuts, tears, excessive wear, deformations, or damage to the materials, remove it from service.
Also check the condition of the rope before, during and after operation.
Always use in accordance with the guidelines and procedures established for the rope system.
To ensure greater performance and durability:
Clean using water and mild soap when necessary.
Remove any accumulated residue and dirt after use.
Do not use chemicals or harsh agents that could damage the materials.
After cleaning or use in humid environments, allow the equipment to dry completely.
Store only when clean and dry .
Keep the product in a dry, covered, and well-ventilated place.
Avoid storing near corrosive agents or chemicals.
Regularly inspect the canvas, aramid fiber, Velcro, seams, and eyelets.
If any cuts, tears, excessive wear, deformations, or other damage that could compromise its function are identified, remove the equipment from service.
FP Safe develops equipment for professionals who demand performance, durability, and reliability in rope access, rescue, and industrial environments. Their products are designed with the real needs of professional operations in mind.
At FP Solução , you'll find the Pro FP Safe FP-PCP Rope Protector, along with specialized technical support, prompt delivery, a large inventory, and consultative service to help you choose the ideal equipment for your operation.
Pro FP Safe FP-PCP Rope Protector made of aramid fiber and high-tenacity canvas, 65 x 15 cm. Protection against edges, corners, abrasion and heat.
FP Safe rope protector, Pro rope protector, FP-PCP, aramid rope protector, rope protector for edges, rope protector for ledges, rope protector against abrasion, heat-resistant rope protector, 65 cm rope protector, rope protection, rope protection for work at height, NR35 rope protector, rope access protector, vertical rescue protector, technical rescue protector, industrial mountaineering rope protector, offshore rope protector, oil and gas rope protector, rope access equipment, rescue equipment, industrial rope protection, rope protector with velcro, rope protector with eyelets, aramid protector, FP Safe, FP Solution.