Carregando conteúdo…
Carregando conteúdo…
No product video available
Contact technical support for more materials about this item.
The 4Climb 3/8 x 5" (127 mm) steel anchor bolt is a torque-expansion mechanical anchor , suitable for securing bolt plates and for applications requiring mechanical fastening in compatible structures.
Used in the assembly and protection of rock climbing routes , the Parabolt 4Climb can also be used in other anchoring applications, provided that the receiving structure, dimensions, and installation are previously evaluated by a legally qualified professional.
The system is supplied with a threaded body, nut, washer, and clip , forming the necessary assembly for its installation. At the end of the rod, it has a flattened head , which allows the anchor to be hammered in to facilitate its insertion during application.
It has nominal dimensions of 3/8 x 5" , corresponding to approximately 127 mm in length , and a bright zinc-plated finish.
The diameter of the drill bit used in the installation must match the nominal diameter of the anchor bolt , following the proper procedures for drilling, cleaning the hole, positioning, and applying torque.
In addition to applications in climbing and rappelling, this type of anchor can be used in situations requiring high shear strength, such as securing certain elements to facades and pallet racking structures, always subject to design, dimensioning, and technical evaluation of the receiving structure.
Torque-expansion mechanical anchor bolt .
4Climb brand.
Nominal measurement of 3/8 x 5" .
Length approximately 127 mm .
Made of steel .
Bright zinc-plated finish .
Suitable for securing bolts .
Applicable to the assembly and protection of rock climbing routes.
It can integrate systems used in climbing and rappelling when properly designed.
Supplied with threaded body, nut, washer and clip .
Flattened head for easy impact installation.
Torque-based expansion system.
It can be installed through the part to be fixed.
Drill bit diameter corresponding to the nominal diameter of the anchor bolt.
Suitable for applications requiring shear strength, provided the dimensions are properly adjusted.
Professional application subject to evaluation of the receiving structure.
The 4Climb steel anchor bolt can be used, when correctly sized and installed, in:
Fixing of platelets
Setting up rock climbing routes
Protection of climbing routes
Technically engineered anchoring systems
Applications related to climbing
Applications related to rappelling
Mechanical fasteners in compatible structures
Fixing certain elements to facades
Pallet racking structures
Applications subject to shear stress
Other applications compatible with the anchor's characteristics.
Product: Parabolt / Mechanical Expansion Anchor
Brand: 4Climb
Material: Steel
Nominal Measurement: 3/8 x 5"
Length: 127 mm
Fastening System: Torque Expansion
Finish: Bright Zinc Plated
Components: Threaded body, nut, washer, and clip.
Stem End: Flattened Head to Aid Installation
Drill Bit Diameter: Equal to the Nominal Diameter of the Anchor Bolt
Installation via the part to be fixed: Yes
Main Application: Securing Plates and Compatible Mechanical Fasteners
Every anchor point must be designed and sized by a legally qualified professional.
Check the strength and characteristics of the receiving structure beforehand.
The type of substrate must be compatible with the fastening system.
Respect the technical limitations of the product and the system in which it will be installed.
Use a drill bit with a diameter corresponding to the nominal diameter of the anchor bolt.
Perform the drilling and hole preparation correctly before installation.
Use appropriate tools for installation and torque application.
The torque must comply with the technical specifications applicable to the product and the project.
Do not use parts that are deformed, corroded, or have damaged threads.
Do not improvise components of the assembly.
In anchoring systems, also check the compatibility of the anchor plate and other components.
The installation must take into account the material, strength, and conditions of the receiving structure.
Do not use this equipment in critical applications unless you have adequate practical training.
For climbing, rappelling, or fall protection systems, installation should not be based solely on product dimensions; proper design and technical assessment are essential.
To preserve the characteristics of the Parabolt 4Climb:
Store in a dry, covered, and well-ventilated place.
Keep protected from chemical agents and environments that may accelerate corrosion processes.
Before installation, check the condition of the thread, nut, washer, and clip.
Do not use components that show deformation, significant corrosion, or mechanical damage.
After installation, the point must undergo the inspections defined for the system and application.
In outdoor or harsh environments, consider the exposure conditions and material compatibility.
Do not make any alterations, cuts, or modifications to the anchor bolt.
Components that exhibit conditions that could compromise their strength should be removed from service.
At FP Solução , you can find the 4Climb 3/8 x 5" (127 mm) steel anchor bolt for securing bolt hangers and other compatible applications, as well as equipment and accessories for climbing, rappelling, anchoring systems, and professional activities.
FP Solução offers specialized service to assist professionals and companies in choosing equipment and components suited to the characteristics of each application.
4Climb 3/8 x 5" (127 mm) steel anchor bolt, zinc plated, with nut, washer and clip. Suitable for securing anchor bolts, climbing and rappelling.
Parabolt 4Climb, Parabolt 3/8 x 5, Parabolt 127 mm, Steel Parabolt, Zinc-Plated Steel Parabolt, 4Climb Anchor, 3/8 x 5 Anchor, 127 mm Anchor, Steel Anchor, Parabolt Anchor, Mechanical Expansion Anchor, Torque Anchor, Parabolt for Anchor Plate, Anchor for Anchor Plate, Climbing Parabolt, Parabolt for Climbing, Anchor for Climbing, Rappelling Parabolt, Parabolt for Rappelling, Anchor for Rappelling, Anchor for Rappelling, Anchor Plate Fixing, Climbing Anchor Plate, Climbing Anchor, Rappelling Anchor, Zinc-Plated Parabolt, Zinc-Plated Anchor, Parabolt with Nut and Washer, Climbing Equipment, Rappelling Equipment, 4Climb, FP Solution.