PRODUCT DESCRIPTION:
Forged steel connector with double locking screw type, with a resistance of 22kN.

PURPOSE AND APPLICATION:
Connect compatible fall protection systems.

INSTRUCTIONS FOR USE:
Developed as a connecting link between protection systems against
falls.

INSPECTION / MAINTENANCE:
Before each use, check for proper mechanical functioning and the effects of
corrosion or mechanical deformation, if any. It must be ensured that the
The connector used is correctly attached to the anchoring element and
that it is locked, according to NBR 15837:2010.

If the equipment gets dirty, clean it with a cotton cloth.
or a soft brush. Do not use abrasive materials. For cleaning
For intensive care, wash in water at a temperature of 25ºC to 50ºC, using a
neutral detergent. It should be allowed to air dry naturally, kept away from...
Keep away from fire or any other heat source. Avoid direct sunlight.
Store in a cool, dry place, preferably away from moisture and light.
Direct sunlight, very acidic or basic conditions, or sharp edges.

USEFUL LIFE:
The user must perform an inspection before using the equipment, in order to
to ensure that it is in good condition for placement and operation.
Check that the components are not rusty or mechanically damaged.
distorted, must not contain cracks or wear, the connector cannot
No breakage is reported anywhere. Remove the equipment from use when...
If you have any doubts about its condition, do not use it again until a
Written confirmation from a competent person.