Carregando conteúdo…
Carregando conteúdo…
No product video available
Contact technical support for more materials about this item.
The 4Climb Simple Anchor Plate is a component developed for creating anchor points , manufactured from 4.25 mm thick carbon steel , offering strength and ease of installation in compatible applications.
It has a 10 mm fixing hole and a resistance of 25 kN , making it suitable for applications in climbing, rappelling, slacklining, tricklining, highlining, and professional activities that use anchoring systems, always subject to proper design and installation.
Its oval-shaped central hole was developed to allow the use of more than one carabiner, according to the limitations of the equipment, in addition to providing a contact area that helps reduce wear on the connectors.
The Chapeleta 4Climb also features anti-rotation wedges , which help stabilize the piece after proper installation.
The finish utilizes FeZn 12 microns – trivalent zinc plating , a process described as free of hexavalent chromium, providing surface finish and protection to the carbon steel.
Strong, functional, and easy to install, the 4Climb Simple Anchor Plate is an option for creating anchor points in various sports and professional activities, provided that the design, the receiving structure, the fastening system, and the technical limitations of the component are respected.
Made of carbon steel .
Thickness of 4.25 mm .
10 mm mounting hole .
Resistance of 25 kN .
Central hole with an oval shape.
Tested capacity for use with more than one carabiner, according to the manufacturer's information.
Hole design developed to reduce wear on carabiners.
It has anti-rotation wedges .
Simple to install when done correctly.
Finish: 12 microns of zinc .
Trivalent zinc plating .
The finish is described as being free of hexavalent chromium.
Suitable for compatible sports and professional applications.
Product of 4Climb .
The 4Climb Simple Plate, when correctly designed, sized and installed, is suitable for:
Rock climbing
Assembly and protection of climbing routes.
Rappelling
Slackline
Trickline
Highline
Anchoring systems
Professional activities in structures
Systems that require a compatible connection point.
Other planned applications for the component
The suitability of the anchor plate for the application also depends on the fastening element, the receiving structure, and the dimensions of the anchor point .
Product: Simple Hat
Brand: 4Climb
Material: Carbon Steel
Thickness: 4.25 mm
Mounting hole: 10 mm
Resistance: 25 kN
Hole for Connectors: Oval
Anti-rotation system: Anti-rotation wedges
Finish: FeZn 12 Microns
Surface Treatment: Trivalent Zinc Plating
Hexavalent Chromium: Finish indicated as free of hexavalent chromium.
Application: Composition of Anchor Points in Compatible Systems
Every anchor point must be designed by a legally qualified professional.
Check the strength and characteristics of the receiving structure before installation.
Use a fastener compatible with the 10 mm hole and the system design.
The complete point resistance should not be determined solely by the nominal resistance of the plate.
Consider the strength of the structure, the anchor bolt, the plate, and the other components involved.
Install the part respecting its correct position and orientation.
Check that the anti-rotation wedges are correctly positioned after installation.
Use only connectors that are compatible with the shape and dimensions of the hole.
Inspect the plate before use.
Do not use parts that are deformed, excessively worn, or have corrosion that could compromise their integrity.
Do not make any additional modifications, cuts, welds, or drill holes in the part.
The parts should only be used within the limitations indicated for the product.
Do not use this equipment if you do not have adequate practical training for the activity.
To preserve the characteristics of the 4Climb Simple Plate:
Perform periodic inspections of the part and the attachment point.
Check for signs of corrosion, deformation, wear, or movement of the plate.
Pay special attention to the area where carabiners and other connectors make contact.
Periodically check the condition of the fastener and the receiving structure.
Avoid contact with chemicals that could damage the steel or its surface finish.
Do not use components that show damage that could compromise their strength.
In permanent installations, establish an inspection program that is appropriate for the environment and frequency of use.
Harsh, humid, saline, or corrosive environments require special attention to the condition of the material and the finish.
At FP Solução , you can find the 4Climb Simple Plate in Carbon Steel with a 10 mm hole and 25 kN resistance , as well as parabolts, connectors, and other components for assembling anchoring systems.
FP Solução offers specialized support to assist professionals and companies in choosing equipment and components compatible with the characteristics and needs of each application.
Simple 4Climb plate in 4.25 mm carbon steel, 10 mm hole, 25 kN resistance and FeZn 12 micron finish with trivalent zinc plating.
4Climb Anchor Plate, Simple 4Climb Anchor Plate, Carbon Steel Anchor Plate, 10 mm Anchor Plate, 10 mm Hole Anchor Plate, 25 kN Anchor Plate, 25kN Anchor Plate, Anchor Plate for Parabolt, Climbing Anchor Plate, Climbing Anchor Plate, Anchor Plate for Rappelling, Rappelling Anchor Plate, Anchoring Anchor Plate, Anchoring Anchor Plate, Rock Anchor Plate, Slackline Anchor Plate, Highline Anchor Plate, Trickline Anchor Plate, Zinc Plated Anchor Plate, Trivalent Zinc Plated Anchor Plate, FeZn Anchor Plate, Anchor Point, Climbing Anchor, Rappelling Anchor, Anchor with Oval Hole, Climbing Equipment, Rappelling Equipment, 4Climb, FP Solution.