Carregando conteúdo…
Carregando conteúdo…
No product video available
Contact technical support for more materials about this item.
The S.Tec 80 cm Blue Protected Tape Ring is designed for creating anchors, load equalization, and deflections , especially in situations where the tape remains in contact with structures and surfaces that may cause abrasion.
Its main distinguishing feature is the external canvas protection that surrounds the tape , creating an additional layer between the textile element and the contact surface. This construction helps reduce wear caused by abrasion and increases the tape's lifespan when used under the conditions specified by the manufacturer.
The inner tape is made of high-strength nylon , with electronically stitched seams , providing standardization in the component's manufacturing.
Measuring 80 cm in length and with a breaking load of 22 kN , the S.Tec Protected Tape facilitates the installation of anchor points, equalizations, and deviations, offering a practical solution for systems where the tape comes into contact with the structure.
The built-in protection reduces the need to add separate protection at the contact points in compatible applications, making system assembly more practical.
Length of 80 cm .
Breaking load of 22 kN .
Made from high-strength nylon .
It has an external canvas covering .
Protective coating designed to reduce tape abrasion.
It helps to increase the component's lifespan.
Suitable for contact with structures in compatible applications.
Seams made electronically .
It facilitates the installation of anchor points.
Recommended for load equalization .
Recommended for creating deviations .
Integrated protection within the tape itself.
Reduces the need for additional protection at contact points under compatible conditions.
Blue color.
S.Tec / Safetec product.
The S.Tec 80 cm Protected Tape Ring can be used, under the conditions specified for the equipment, in:
Anchor points
Anchoring systems
Load equalization
Deviations
String systems
Rescue
Technical operations
Assemblies in structures
Systems in which the tape remains in contact with structures.
Other configurations compatible with the equipment's specifications.
Product: Protected Tape Ring
Brand: S.Tec / Safetec
Length: 80 cm
Color: Blue
Tape Material: High-Strength Nylon
External Protection: Abrasion Protection Tarp
Breaking Load: 22 kN
Sewing: Done Electronically
Main Applications: Anchoring, Load Equalization and Deflections
Feature: Built-in Protection for Contact Points with Structures
Thoroughly inspect the tape before each use.
Check the condition of the outer canvas cover , the inner tape, and the seams.
Check for cuts, tears, excessive abrasion, burns, contamination, or other damage.
Make sure the structure used is compatible with the system configuration.
Check the condition of the contact point before installation.
Although it has external abrasion protection, do not use it on sharp edges or surfaces that could break or puncture the protection and the tape .
Respect the stated breaking load and the limits established for the complete system.
Keep in mind that the strength of a system also depends on the other components, anchor points, and the configuration used.
Do not make knots, cuts, additional seams, or modifications to the equipment.
Use compatible connectors and other components.
Do not use if the outer protection or the inner tape shows damage that could compromise its integrity.
The installation of anchoring systems must be carried out by qualified professionals and in accordance with the procedures applicable to the activity.
To preserve the characteristics of the S.Tec Protected Tape:
Inspect before and after each use.
Keep the tape and its outer protection clean.
Regularly check areas that remain in contact with structures.
Avoid contact with chemicals that are incompatible with the equipment materials.
Protect against sharp surfaces and intense heat sources.
If it gets wet, let it air dry naturally in a well-ventilated area.
Do not use direct heat sources to speed up drying.
Store in a dry, clean, covered, and well-ventilated place.
Avoid unnecessary exposure to solar radiation during storage.
Remove from use if it shows cuts, excessive wear, compromised seams, or other damage that may affect its durability.
FP Solução is an official S.Tec / Safetec distributor in Macaé and the surrounding region , offering original equipment from the brand and specialized service to assist professionals and companies in choosing the appropriate components for each application.
At FP Solução, you can find the S.Tec 80 cm Blue 22 kN Protected Tape Ring , as well as connectors, devices, anchoring equipment, and other products from the S.Tec / Safetec line.
FP Solução – Official Distributor of S.Tec / Safetec in Macaé and region.
🔰 From helmet to carabiner, FP is the solution! 🔰
S.Tec 80 cm blue protected webbing ring made of high-strength nylon, offering abrasion protection and a breaking load of 22 kN for anchorages and deflections.
S.Tec Tape Ring, S.Tec Protected Tape Ring, S.Tec Protected Tape, S.Tec Tape 80 cm, S.Tec 80cm Tape, 80 cm Tape Ring, 80 cm Protected Tape, Blue Tape Ring, Blue S.Tec Tape, 22 kN Tape Ring, 22 kN Tape, 22 kN Protected Tape, 22 kN Nylon Tape, High Resistance Nylon Tape, Anchoring Tape, Anchoring Tape Ring, Equalization Tape, Deviation Tape, Abrasion Protected Tape, Structural Tape, S.Tec Anchoring Ring, Anchoring Equipment, S.Tec Macaé, Safetec Macaé, S.Tec Macaé Distributor, Safetec Macaé Distributor, Official S.Tec Distributor, Official Safetec Distributor, FP Solução.